Registering Bluetooth Device (Pairing) - Kenwood KDC-BT648U Manual De Instrucciones

Input the PIN code
4
■
Turn the volume knob to select the
number.
To move to the next digit, press ¢.
■
To delete the last digit, press 4.
■
5 Press the volume knob to transmit the
PIN code.
If "PAIRING OK" is displayed, registration is
completed.
When "CONFIRM PHONE" is displayed,
confirm connection with a cell-phone
operation.
The receiver is connected to a cell-phone,
6
with "HF CONNECT" displayed, and exits
the easy pairing mode.
■
If an error code is displayed during paring,
see <Troubleshooting> (page 34).
When a cell-phone has already been
registered, or maximum of five cell-phones
have already been registered/ selecting a
cell-phone
"(cell-phone name)" or "DEVICE FULL" is
2
displayed.
Turn the volume knob to select a cell-
3
phone name.
■
To register a new cell-phone, select "[DVC
SEARCH]", then go to "When registering a
cell-phone for the first time."
Press the volume knob to set up the
4
cell-phone.
■
"✱(cell-phone name)": The selected
Bluetooth device is busy.
■
"-(cell-phone name)": The selected
Bluetooth device is on standby.
■ " (cell-phone name)": The Bluetooth
device is deselected.
■
If a cell-phone is already selected,
deselect it, and then select a different
one.
Press to exit easy pairing mode.
5
Deleting the registered cell-phone
"(cell-phone name)" or "DEVICE FULL" is
2
displayed.
Turn the volume knob to select a cell-
3
phone name.
Press and hold the volume knob to delete
4
the selected cell-phone.
"DELETE" is displayed.
5 Turn the volume knob to select "YES",
then press to confirm.
"COMPLETED" is displayed.
Registering Bluetooth Device
(Pairing)
Registering from Bluetooth devices
Press SRC to turn on the power.
1
Start registering this unit by operating
2
the Bluetooth device.
By operating the Bluetooth device, register
the hands-free unit (pairing). Select
"KENWOOD BT CD/R-3P1", "KCA-BT300" or
"KCA-BT200" from the list of connected
units.
Input the PIN code ("0000") in the
3
Bluetooth device.
Check that registration is complete on
the Bluetooth device. PIN code is set to
"0000" as the default. You can change this
code. Refer to [PIN CODE EDIT] under
<Bluetooth Setup> (page 22).
By operating the Bluetooth device, start
4
hands-free connection.
Registering from this unit
/
1
KDC-BT648U KDC-X695
Press to enter Bluetooth mode.
/
KDC-X395 KDC-348U
Press and hold the volume knob to enter
Bluetooth mode.
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Turn the volume knob to select
3
[PAIRING], then press to enter.
Turn the volume knob to select [DEVICE
4
SEARCH], then press to enter.
Press the volume knob to search for the
5
Bluetooth device.
When search is completed, "FINISHED" is
displayed.
Turn the volume knob to select a
6
Bluetooth device name, press to confirm.
Continued to next page
19
English