Idiomas disponibles
Idiomas disponibles
Using with other equipment
Specifying the type of digital video signals
1
Press HOME MENU.
2
Select "Option" (/ then ENTER).
3
Select "HDMI Input" (/ then ENTER).
4
Select "Video" (/ then ENTER).
5
Select the type of digital video signals (/ then ENTER).
• If you select "Auto", an attempt will be made to identify the type
of digital video signals when digital video signals are received.
Item
Description
Auto (default)
Automatically identifies input digital video signals
Color-1
Digital Component Video signals (4:2:2) locked
Color-2
Digital Component Video signals (4:4:4) locked
Color-3
Digital RGB signals (16 to 235) locked
Color-4
Digital RGB signals (0 to 255) locked
6
Press HOME MENU to exit the menu.
Note
• If you select a parameter other than "Auto", make such a
setting that results in natural color.
• If no image appears, or images appear in inappropriate colors,
specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
Specifying the type of audio signals
When using the INPUT 3 HDMI terminal, you need to specify the
type of audio signals.
1
Repeat steps 1 to 3 provided for Specifying the type of
digital video signals.
2
Select "Audio" (/ then ENTER).
3
Select the type of audio signals (/ then ENTER).
• If you select "Auto", an attempt will be made to identify the type
of audio signals when audio signals are received.
Item
Description
Auto (default)
Automatically identifies the input signals
Digital
Accepts digital audio signals
Analog
Accepts analog audio signals
4
Press HOME MENU to exit the menu.
Note
• The INPUT 4 and INPUT 5 HDMI terminals accept only digital
audio signals.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
Using control cords
Connect control cords between the plasma television and other
Pioneer equipment having the t logo to be able to operate the
connected equipment via the remote control sensor on the plasma
television.
After the CONTROL IN terminals have been connected, the remote
control sensors on the connected equipment do not accept
commands from the remote control units. Face the remote control
units to the remote control sensor on the plasma television when
operating the connected equipment.
Note
• Make sure that the power cord is removed from the power
outlet when making connections.
• Complete all component connections before making control
cord connections.
About SR+
The CONTROL OUT terminal on the rear of the plasma television
supports SR+ that allows linked operations with a Pioneer AV
receiver. SR+ presents functions such as the input switch linkage
operation function and the DSP surround mode display function.
For more information, see the instruction manual that came with
the Pioneer AV receiver supporting SR+.
Note
• While in connection through SR+, the volume on this system is
temporarily minimized.
• When making control cord connections, use the SR+ cable.
• When making control cord connections with one or more
pieces of Pioneer equipment, directly connect the plasma
television and the Pioneer amplifier that supports SR+. Do not
connect other equipment between them.
MONITOR
SUB
OUT
WOOFER
(Rear view)
a
b
c
When SR+ is not used (a, b and c):
The control cables (commercially available) are mono sound cables with mini
plugs (no resistance).
When SR+ is used (a):
Use the SR+ cable (available as option).
10
CONTROL
IN
OUT
CONTROL
IN
OUT
CONTROL
IN
OUT
47
En
