Idiomas disponibles
Idiomas disponibles
Install window (A) on the cabinet using M6X12 screws (AA) and M6 nuts
(EE).
Install the hinges (T) to the cabin with the M4X10 screws (CC).
Plug the power cord (QQ) to the switch box (F).
Material used:
OPERATION
Before first use, open the window and put abrasive sand inside
the funnel.
Connect the compressed air tube to the machine.
Note: Make sure the pressure does not exceed 100PSI (6.9 BAR)
Plug the machine to the power supply.
Press the switch to turn on the light.
Press the gun trigger to start cleaning.
