Idiomas disponibles
Idiomas disponibles
Tighten the 4 screws of the funnel bottom.
Stick sealing tapes (NN) around the funnel bottom.
AssembIy funneI bottom pIate (Y) to the funnel using M4X10 screws (CC) and washers (GG).
Assembly funneI bottom cap (N) to pIate (J) using M6X12 screws (AA).
Material used:
Assembly the bracket (P) to four funnel corners using the M4X10 screws (CC) and washers (GG).
Note: Put sealing tape between the support plates (P) and the funnel.
Material used:
