Idiomas disponibles
Idiomas disponibles
Stick sealing tape on the back part of the right cabinet plate (E), on the
back part of the left cabinet plate (I) and ont the back plate (C) .
Note: Make sure that there is sealing tape on the two corners.
Material used:
Installed the Iamp cIamp (HH) to the top pIate of cabinet (D) using M4X6
screws (DD), M4 nuts (FF) and fIat gaskets (TT).
Put the Iamp into the cIamp (HH) and fasten as shown in the drawing (II).
Install the the top pIate (D) to the cabinet using M6X12 screws (AA) and
M6 nuts (EE).
Connect the lamp (Q) wiring to the switch(F). Pay attention to the wire's
colors.
Install the switch box (F) to the left plate of cabinet (E) using M4X10
screws (CC), M4 nuts (FF) and flat gaskets (GG).
Not: Ensure the switch button is faced towards the operator.
Material used:
