Idiomas disponibles
Idiomas disponibles
Stick sealing tape (NN) on the edges of the back (J) and front (K) plates.
Notes:
Make sure to over stick the sealing tape 10mm in the upper part of the funnel.
Material used:
Use two M4X10 screws (CC) to install the lock (Z) on the funnel (K).
Use five M6X12 screws (AA) and five nuts (EE), to fix the funnel front plate (K) to the side plate (L).
Note:
Make sure to use sealing tape to seal every joint during assembly.
Material used:
