Kenwood KDC-BT645U Manual De Instrucciones página 40

Reproductor de discos compactos receptor de fm/am
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Troubleshooting Guide
NO MUSIC DATA/ERROR 15:
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
USB ERROR:
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
iPod ERROR:
Connection to the iPod has failed.
➪ Remove the USB device and then
reconnect it.
➪ Confirm that the software for the iPod is
the latest version.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
NO NUMBER:
• The calling party does not notify a caller ID.
• There is no phone number data.
NO DATA:
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
NO ENTRY:
The cell-phone has not been registered
(pairing).
HF DISCONCT: The unit cannot communicate with the cell-
phone.
HF ERROR 07:
The memory cannot be accessed.
➪ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF ERROR 68:
The unit cannot communicate with the cell-
phone.
➪ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
UNKNOWN:
The Bluetooth device cannot be detected.
DEVICE FULL:
5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
PIN CODE NG: The PIN code is wrong.
CONNECT NG: The unit cannot be connected to the device.
PAIRING NG:
Pairing error.
NO MATCHING: The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
40
|
KDC-BT645U/ KDC-HD545U
TOO SOFT:
Voice is too small and cannot be recognized.
TOO LOUD:
Voice is too large to be recognized.
TOO LONG:
The word or utterance is too long to be
recognized.
NO PHONEBOOK:
Data is not contained in the phone book.
NO MESSAGE: No short message in In Box.
NO RECORD:
The voice tag is not registered in the phone
book.
MEMORY FULL: The number of voice tags reaches the
maximum number to be registered in the
phone book.
NO ACCESS:
The procedure preset with mixed preset
memory function cannot be available.
The preset content may not be recalled
depending on the selected band or source.
NO VOICE:
No call.
MEMORY FULL: The tag memory of HD Radio receiver is FULL.
iPod FULL:
The iPod memory is FULL.
NO TAG FNC:
iPod which does not support the tag memory
is connected.
TAG ERROR:
The procedure is not registered to TAG
Memory function
N/A CHANNELS: No receivable channel and category.

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Kdc-hd545u

Tabla de contenido