Husqvarna K1 PACE Manual Del Usuario página 29

To install the rail fixture RA 10, RA 10S
CAUTION:
rail before you install the product to the rail
fixture. There is a risk that the rail fixture is
not installed at a correct angle if the product
is installed first.
1. Attach the rail fixture to the rail. Tighten the handle
fully.
2. Install the product on the rail fixture with the right
side of the product against the rail fixture.
Note:
It is also possible to install the product with the
left side against the rail fixture, but we recommend to
use the right side when possible.
To install the rail fixture RA 11
CAUTION:
rail before you install the product to the rail
fixture. There is a risk that the rail fixture is
not installed at a correct angle if the product
is installed first.
1598 - 007 - 28.09.2023
Install the rail fixture to the
Install the rail fixture to the
1. Attach the rail fixture to the rail. Tighten the handle
fully.
2. Make sure that the claw is tightly attached to the rail.
3. Attach the right side of the product to the rail fixture.
Tighten the lock handle.
Note:
It is also possible to install the product with the
left side against the rail fixture, but we recommend to
use the right side when possible. Refer to
points and rail fixture indicator on page 28 .
To prepare the cutting guide
Note:
The first time you use the rail system, you must
cut the cutting guide.
Installation
29