voestalpine bohler welding URANOS NX 2200 PMC Manual De Instrucciones página 86

SETUP
Lock/unlock
551
Allows the locking of the panel controls and the insertion of a protection code.
Refer to section "Lock/unlock (Set up 551)".
Buzzer tone
552
Permits adjustment of the buzzer tone.
EN
Minimum
0/off
Regulation step
601
Allows the regulation of a parameter with a step that can be personalised by the operator.
Minimum
1
602
U/D torch
606
Allows the management of the external parameter (U/D).
Value
0/off
1/I1
612
It allows the management of the channels of the digital torch.
Value
0/off
1/I1
2/
3/CH3
4/CH4
5/STD
Wire speed
653
It allow wire speed regulation (during wire loading phase).
Minimum
0.5 m/min
Circuit resistance calibration
705
Allows the calibration of the system.
Refer to section "Circuit resistance calibration (set up 705)".
Current reading
751
Allow the real value of the welding current to be displayed.
Voltage reading
752
Allows the real value of the welding voltage to be displayed.
Maximum Default
10 10
Maximum Default
Imax 1
Default Callback function
- off
X Current
- Program retrieval
Default Callback function
- off
- Current
- Program retrieval
- CH3
- CH4
X STD
Maximum Default
22.0 m/min 3.0 m/min
82