Idiomas disponibles
Idiomas disponibles
3 Features and Functions
[View] Menu Status
In the event where there is no data available to be displayed, the [View] menu will display a status text on the bottom
of the display. Below is a list of the status text and its respective description.
Status
"The readings in memory were made with a different
set of modules installed, and cannot be graphed"
"Pre-Storing"
"No scan data in memory"
"No digitize data in memory"
"Scan in progress"
"Digitize in progress"
"Wait for arm event"
"Wait for external event"
"Wait for internal event"
"Wait for alarm event"
"Wait for manual event"
"Wait for channel event"
94
Description
The instrument is unable to plot the data of the last completed Scan data acquisition
operation because the module card has been switched out.
The instrument is currently collecting PreTrigger samples before entering into Wait
for Trigger state.
No data acquired in Scan mode.
No data acquired in DMM Digitize and Digitizer mode.
Scan data acquisition mode is in progress.
DMM Digitize/ Digitizer data acquisition mode is in progress.
The digitizer is waiting for arm event before initiating the digitizing process.
The instrument is waiting for an external trigger before initiating data acquisition.
The instrument is waiting for an internal trigger before initiating data acquisition.
The instrument is waiting for an alarm trigger before initiating data acquisition.
The instrument is waiting for a manual trigger before initiating data acquisition.
The instrument is waiting for a channel trigger before initiating data acquisition.
Keysight DAQ970A/DAQ973A User's Guide
