Idiomas disponibles
Idiomas disponibles
1 Introduction to the Instrument
Instrument Annunciators
The table below shows the various annunciators that are available on the DAQ970A/DAQ973A. The annunciators will
be shown on the top of the display when the corresponding conditions are met.
Annunciator
16
Description
Monitor mode enabled.
Digitizing is in progress.
Scanning/DMM digitizing is in progress.
A – Alarms are present in the alarm queue.
H1234L – A High or Low alarm condition has occurred.
Internal DMM is disabled. Instrument configured for an external scan interval when DMM is Off.
Reading memory overflowed at 1,000,000 readings. New readings will overwrite the oldest readings.
A USB drive is inserted in the front panel USB host port.
Instrument is in remote (remote interface)
Errors are present in the error queue. Press [View] > Errors to view the list of errors.
Keysight DAQ970A/DAQ973A User's Guide
