Idiomas disponibles
Idiomas disponibles
To configure the strain offset:
1. Use the knob or the front panel arrow keys to navigate across the list and press the Select softkey to enable the
strain offset measurement on the highlighted channel. The selected channel is marked with an "X". Press the
Select softkey again to disable the offset measurement on the highlighted channel. Note that upon pressing this
softkey will also enable the Measure Now and Clear Offsets softkeys.
2. Press Select All to enable the offset measurement on all listed channels. Press this softkey again to disable the
offset measurement on all listed channels.
3. Press Measure Now to immediately measures the offset value on the selected channel(s). Offset readings will dis-
play on the screen as shown below:
4. Press Clear Offsets softkey if you would like to immediately clear the strain offset value to 0 on the selected chan-
nel(s).
Keysight DAQ970A/DAQ973A User's Guide
3 Features and Functions
73
