Idiomas disponibles
Idiomas disponibles
Diode
The Diode measurement option will only be available when Scan is selected as the acquisition mode.
This section describes how to configure the selected channel for diode test from the front panel.
1. Connect diode source to the module's screw terminals.
2. Press [Channel] > Measure, and select DIODE from the selection menu.
Advanced settings
Press Advanced to configure the advanced settings for the measurement.
Softkey
Delay
Auto/ Time
Keysight DAQ970A/DAQ973A User's Guide
Description
Selects whether the delay between channels in the scan list will be automatically or manually selected. By
selecting
Auto , instrument will automatically determine the channel delay based on measurement function,
range, integration time, and AC filter setting. By selecting
ted between the relay closure and the actual measurement on each channel, in addition to any delay that
will implicitly occur due to relay settling time.
3 Features and Functions
Time , the specified delay (time in seconds) is inser-
129
