Idiomas disponibles
Idiomas disponibles
3 Features and Functions
Card Reset
The options is only available when Scan is selected as the data acquisition mode.
Press the Card Reset softkey to reset the module. This opens all the channels on the module. On the multifunction
module, this also configures the digital I/O ports as inputs and sets the DAC outputs to voltage mode (if not locked)
and the output level to 0.
Module Label
Press Module Label softkey to specify a label for current selected module. Use the knob or the front panel arrow keys
to enter the characters into the display. Note that you are only allowed to enter maximum of 10 characters for the
module label, including letters, numbers, and special characters. To reset it to the default module label, press
Module Label > Clear All > Done.
178
Keysight DAQ970A/DAQ973A User's Guide
