Unfolding The Wheelchair; Removing And Fitting The Rear Wheels - Küschall CHAMPION Manual Del Usuario

Champion

Unfolding the wheelchair

1. Pull the cord on the front under the seat cover until the
ratchet engages completely.
CAUTION!
Risk of getting fingers caught
There is a risk of getting your fingers caught
between the parts of the shears.
– Therefore never clasp the shears with your
fingers.
1. Pull up the backrest at the push-handles until the ratchet
bolts engage in the lateral supports.
2. If fitted, replace the backrest stabilization bar by swinging it
upwards and locating the spring pin in its hole, 3.4 Stabilizing
bar for the back (optional), page 11 .
28

7.3 Removing and fitting the rear wheels

WARNING!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during use.
This can lead to overturning.
– Always ensure that the removable axles are fully
engaged whenever you fit a wheel.
Removing the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
3. With the other, hold the wheel through the external spoke rim
around the wheel hub.
4. Using your thumb, press the removable axle button A. Keep
it pressed and pull the wheel out of the adapter sleeve B.
Fitting the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
1583536-A