Safety Devices; Labels And Symbols On The Product - Küschall ULTRA-LIGHT Manual Del Usuario

Ultra-Light

2.2 Safety devices

WARNING!
Risk of accidents
Safety devices that are incorrectly set or no longer
working (brakes, antitipper) can cause accidents.
– Always check that the safety devices are working
before you use the wheelchair and have them
checked regularly by the specialist dealer.
The functions of the safety devices are described in chapter 3
Components and their functions, page 9 .

2.3 Labels and symbols on the product

Identification label
The identification label is attached to the frame of your
wheelchair and gives the following information:
K üschall A G
B enkenstrasse 260
A
4108 W itterswil
SWITZERL A N D
B
KÜSC H A L L U ltra-L ight 2009 S B 440 mm
C D
01/10/2009
E F
130 k g
01234567890
G
H
A ctive wheelchair, tipping possible !
Manufacturer's address
A
B Product description
8
www.kuschall.com
Read U ser Man ual
Mad e in S witzerland
C Date of manufacture
Instruction to read the User Manual
D
E Maximum user weight
Instruction that this wheelchair is not designed for
passenger transport in vehicles with a backrest height
less than 400 mm.
If the backrest height is more than 400 mm passenger
F
transport in vehicles is allowed under following
conditions, ® 7.4 Transporting the occupied wheelchair
in a vehicle, page 35. In this case symbol F is not struck
out on the identification label.
Serial number
G
H Warning that this is an active wheelchair and can tip
Snap hook symbol
Tie-down positions where the restraint system
straps must be placed in case of transporting the
ISO 717 6-19
occupied wheelchair in a vehicle.
Antitipper warning label
Follow user manual instructions prior to the
usage of an antitipper device.
1583566-A