Unfolding The Wheelchair; Removing And Fitting The Rear Wheels - Küschall ULTRA-LIGHT Manual Del Usuario

Ultra-Light

Unfolding the wheelchair

CAUTION!
Risk of getting fingers caught
There is a risk of getting your fingers caught
between the seat edge and the frame.
– Never clasp the seat edge with your fingers.
1. Position the wheelchair next to you.
2. If the back is down, fold it up.
3. Tilt the wheelchair, if possible, gently towards you.
4. With your hand flat, press the seat edge closest to you, so
that the seat surface flattens out.
34
5. Put the wheelchair back completely on the floor and
check that the seat edges on both sides are in the guide
components.
6. Fold the footrests down.

7.3 Removing and fitting the rear wheels

WARNING!
Risk of overturning
If the removable axle of a rear wheel is not fully
engaged, the wheel can become loose during use.
This can lead to overturning.
– Always ensure that the removable axles are fully
engaged whenever you fit a wheel.
Removing the rear wheels
1. Release the brakes.
2. With one hand, hold the wheelchair upright.
1583566-A