Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
•
Prior to maintenance work, switch off the appliance and pull out the power plug from the
socket.
•
Do not use metallic objects to clean the appliance.
•
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
•
Check the drain in the refrigerator regularly for defrosted water. Clean the drain if necessary. If
the drain is clogged, water will collect at the bottom of the appliance.
INSTALLATION
IMPORTANT NOTE!
den einzelnen Abschnitten.
•
Unpack the appliance and check it for damage. Do not connect the appliance if it is damaged.
Report any damage immediately to the dealer where you bought the appliance. In this case,
keep the packaging.
•
It is recommended to wait at least four hours before connecting the appliance in order to allow
the oil to flow back into the compressor.
•
You should ensure adequate air circulation around the appliance, otherwise it could overheat.
To ensure adequate ventilation, follow the relevant installation instructions.
•
Wherever possible, the product's spacers should be placed on a wall to prevent contact with
hot parts (compressor, condenser) that could cause burns.
•
The appliance must not be placed near radiators or stoves.
•
Make sure that the power plug is accessible after the appliance has been installed.
SERVICE
•
Any electrical work required for servicing the appliance should be carried out by a qualified
electrician or a competent person.
•
This product must be serviced by an authorised service centre and only original spare parts
must be used.
Befolgen Sie für den elektrischen Anschluss sorgfältig die Anweisungen in
5
