Mitsubishi Electric PLFY-WL-NEMU-E Serie Manual De Instrucciones página 18

3. Operation
3.9. Temperature setting (For Simple MA remote controller)
In COOL, DRYING, HEAT, and AUTO (single set point) modes
Pressing the button increases the preset temperature.
TEMP.
Pressing the button decreases the preset temperature.
TEMP.
In AUTO (dual set point) and SETBACK modes
Cooling preset temperature
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Heating preset temperature
Current operation mode
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
* During the preset temperature setting, the setting will automatically turn off if the
time.
en
16
Current preset temperature (cooling/heating) appears.
* The example shows the display in AUTO (dual set point) mode.
When the TEMP. or TEMP. button is pressed, the preset temperature (cooling/heating) display blinks.
While the preset temperature (cooling/heating) display blinks, pressing the TEMP.
cooling and heating, and pressing the TEMP.
When the MODE button is pressed, only the cooling preset temperature display blinks.
While the cooling preset temperature display blinks, pressing the TEMP.
TEMP.
button decreases the cooling preset temperature.
When the MODE button is pressed, only the heating preset temperature display blinks.
While the heating preset temperature display blinks, pressing the TEMP.
the TEMP.
button decreases the heating preset temperature.
Pressing the MODE button completes the preset temperature setting.
button decreases the preset temperatures for both cooling and heating.
button increases the cooling preset temperature, and pressing the
button increases the heating preset temperature, and pressing
TEMP. TEMP.
or
button increases the preset temperatures for both
button is left untouched for a certain period of