Idiomas disponibles
Idiomas disponibles
8.2 Login on the Wallbox
1.
Select the appropriate language and con-
firm with Next.
2.
Get the password for the service user from
the access data letter, see
Access
3.
In the Login view select the service user
role, enter the corresponding password
and confirm.
Note
Ensure that the access data (password
and host name) is spelt completely cor-
rectly, paying particular attention to capi-
talization.
After five incorrect password entries, there
is a delay before you can make another att-
empt.
After successful login, the Wallbox Overview is
displayed, showing a compact view of the most
important operating statuses and measured
values.
8.3 Configuring the Wallbox
Selecting the countryCountry:Selecting
1.
Select the appropriate country from the
list.
Note
The country code can only be reset to the
factory settings later using the rotary
switch, see
Connecting the infrastructure
cable.
2.
If required, change the units.
3.
Confirm the selection with Next.
38
Configuring software updates
The software for the Wallbox can be updated
using an update server.
If required, the following options can be set for
the configuration.
data.
1.
Select one of the following options for the
automatic software update:
n
Download update automatically
(default setting)
Enabled: The software checks for
available updates and they are dow-
nloaded automatically.
Disabled: The software checks for
available updates and displays a mes-
sage. The download then has to be
started manually.
n
Automatically install update
Enabled: If a software update has
been downloaded, the Wallbox
installs it automatically. This can lead
to a charging process being inter-
rupted.
Disabled: The installation can be
delayed until a later time. Instal-
lation of a software update is only
started when requested by the user.
2.
Confirm the selection with Next.
Selecting the network Network:Selecting
For detailed information about the network set-
tings (for Ethernet, WLAN client and LTE), see
operating instructions.
8 Commissioning
Confirming the disclaimer
n
Agree to the disclaimer and confirm with
Next.
After successful configuration, the Wallbox is
ready for use.
8.4 Repairing errors
8.4.1 Error list
n
To display the error list, select Wallbox
settings, Error list in the web app /
mobile app navigation.
The error list provides the following information
for each error (for details, see operating instruc-
tions):
n
Error code
n
Error status
Note
There may be multiple entries in the error list
that have the same cause (error cascade).
Error categories
The following error categories exist:
Error cate-
Error LED
gory
colour
Fatal error
Red
Critical error
Yellow
Non-critical
Blue
error
No error
White
Repair prio-
rity
1
2
3
-
