KATEK ghost ONE Basic Manual De Instrucciones página 28

Ocultar thumbs Ver también para ghost ONE Basic:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
Note
All of the activities described in
these assembly and installation
instructions may only be per-
formed by a qualified electrical
engineer.
The electrical engineer must have the following
qualifications:
Based on training and experience, the
l
ability to identify risks and to prevent
potential hazards caused by electricity.
Professional qualifications entitling them
l
to perform work on electrical equipment.
Knowledge of the applicable standards and
l
regulations for all work on electrical equip-
ment.
Ability to evaluate measured results.
l
Knowledge of network installation tech-
l
nologies.
Expertise in material selection and instal-
l
lation.
2.3 Safety information
n
Read the instructions carefully and in full
and follow the warning notices.
n
Store the instructions securely.
n
The Wallbox must be installed, connected
and commissioned by a qualified electrical
engineer in compliance with local regu-
lations and standards.
n
Only semi-public and private locations are
permitted.
n
Observe the information regarding the
assembly and installation location, see
Assembly and installation location
n
Observe the ambient conditions (tem-
perature and humidity, see
Technical
data).
n
Only approved parts are to be used. Instal-
lation of damaged / soiled / contaminated
parts is not permitted.
n
Do not stick anything onto the Wallbox or
block it with objects.
n
Do not insert any objects into the Wallbox.
n
Do not place any objects on the Wallbox.
n
Avoid the Wallbox coming into contact
with liquids.
n
Do not install in potentially explosive loca-
tions.
n
Protect each installed Wallbox with a resi-
dual current circuit breaker (min. FI type
A).
n
Observe the required overvoltage and
fault current protection (FI Type A), see
Technical
data.
n
No not use extension leads, cable drums
or multiple socket outlets.
Do not use adapters.
n
n
For ghost ONE ERK version: Protect the
socket.
Do not detach, manipulate or bypass
n
safety fittings such as the manufacturer's
seal.
n
Do not make any modifications to the hou-
sing or the internal components of the
Wallbox.
n
Observe the national safety regulations.
n
Observe all local regulations for electrical
.
installations, as well as current fire pre-
vention and accident prevention regu-
lations.
Persons with a cardiac pacemaker must
n
maintain a distance of 60 cm and persons
wearing a defibrillator a distance of 40 cm
from RFID scanners, identifiable by the
symbol on the front panel.
Note
eSystems MTG GmbH only accepts respon-
sibility for the delivery condition of the Wallbox
and for work performed by the manufacturer's
specialist personnel.
25
loading