Parkside Performance PPKSA 40-Li A1 Traduccion Del Manual De Instrucciones Originales página 58

GB MT
Switch off the device and remove
the battery before carrying out any
maintenance work.
Cleaning
• Clean the machine thoroughly after
every­use.­In­this­way,­you­extend­the­
life of the machine and avoid accidents.
• Keep the gripping handles free of pet-
rol,­oil­or­grease.­Clean­the­gripping­
handles,­where­appropriate,­with­a­
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use. Use
a paint brush or wipe for that. Do not use
any liquids to clean the chain. After clean-
ing,­oil­the­chain­lightly­with­chain­oil.
Maintenance Interval Table
Machine part
Components of
the chain brake
Sprocket chain
wheel­(20)
Saw chain­(6)
Guide bar­(7)
Guide bar­(7)
Automatic oil
system
58
Action
Check,­replace­if­required
Check­for­wear/indentations,­
replace if necessary
Check­oil,­regrind­or­replace­
if required
Check,­clean and oil
Turn around
Check,­clean­oil­aperture­if­
necessary
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush,­whisk­or­dry­cloth.­Do­not­use­
any liquids for cleaning.
Maintenance intervals
Regularly carry out the maintenance opera-
tions listed in the following table.
The­life­of­the­saw­is­extended­by­regular­
maintenance of your chainsaw.
Furthermore,­you­get­optimum­cutting­per-
formance and avoid accidents.
Before every
use





After 10 hours
of operation
