Idiomas disponibles
Idiomas disponibles
2. Press the button for the charge level indi-
26)
cator (
The device is now activated and the
SmartLED
ly).
3.EnableBluetooth
4. Open the Parkside app.
5. Select
.
If you have already connected
the Smart Performance battery
you are using the device with to the
app,youwillfindthedeviceinthelist
of connected devices.
6. Select the device from the list.
If it is not available, connect the de-
vice to the app as follows:
1. Select "
Add device"or,ifyouhave
alreadypaireddevices/batteries,the
at the top right.
2. Follow the instructions in the app. The
app scans the surroundings for available
devices.
3. Select the device you wish to add.
4. You can rename the device if necessary.
Confirmthesuccessfulconnectionwith
"Done"orselect"Add more devices"
directly.
The device is now listed under
connected devices and can be selected.
Upgradingthefirmwarecanchange
the features of the app.
Features of the app
Selecting the device in the list under
will take you to the overview page.
For more detailed information on in-
dividualpoints,selectthe
28)flashes(brief-
(
on your smartphone.
®
in your
.
Privacy policy
Youcanfindthecomplete"
cy"at
.
Disconnecting the device and
deleting data from the app
Go to
to select the device you want
to remove and whose data you want to
delete,pressandholdtheselectionand
swipe from the right to the left edge of the
screen
.
Problems with the app? –
FAQ
1. Select
.
FrequentlyAskedQuestions.
2. Select
Hereyouwillfindfrequentlyasked
questions and the corresponding
answers.
Maintenance and
cleaning
Maintenance and cleaning
work must always be carried
out with the motor switched
off and the batteries removed.
Danger of injury!
Leave any maintenance and servic-
ing work not covered by this man-
ual to our Service-Center. Use only
original spare parts.
Allow the machine to cool down
before all maintenance and clean-
ing works. Danger of burn injuries!
Use cut-protection gloves
when handling the chain or
the chain bar. Risk of cuts!
GB
MT
Privacy Poli-
57
