Husqvarna PG 830 Propane Manual Del Usuario página 18

6. Turn the main switch counterclockwise.
Weights
The product has 1 weight on each side of the product.
If the product is heavy to operate, adjust the weights to
change the pressure on the grinding head. The weights
must be adjusted to the same position on the right and
the left side. The weights has 3 positions:
• Position 1: Maximum pressure on the grinding head.
This position increases the operation effect. This
position is also used when you set the product in
transport position.
• Position 2: Standard pressure on the grinding head.
18
• Position 3: Minimum pressure on the grinding head.
This position is also used when you tilt the product to
servicing position.
To adjust the weights
WARNING:
the weights. The moving parts can cause
injury.
WARNING:
weight lock locks correctly when the weights
are put in the selected position.
1. Push in the weight lock (A) and move the weight to a
selected position (B) with the weight handle. Refer to
Weights on page 18 .
A
2. Release the weight lock to lock the weight in the
selected position.
Be careful when you adjust
Always make sure that the
B
2023 - 003 - 04.04.2023