Husqvarna PG 830 Propane Manual Del Usuario página 12

WARNING:
the support frame. The moving parts can
cause injury.
1. Lift the support frame (A) a small distance.
2. Lower the support frame (B).
3. Fold up the support frame in the opposite sequence.
Diamond tools
There are many different types and configurations
of diamond tools for the product. Metal bonded
diamond tools are used for removal of material
and resin bonded diamond tools are used to polish
surfaces. Select the correct diamond tools for the
surface. Speak to your Husqvarna dealer or go to
www.husqvarnaconstruction.com for support to select
the correct tool.
12
Be careful when you move
A
B
Disc holder alternatives for diamond tools
• Use a Ez wing disc holder to attach metal bonded
diamond tools.
• Use a resin disc holder to attach plastic bonded
diamond tools.
Full set and half set of diamond tools
The configuration of the diamond tool segments has
an effect on the end quality of the surface. The
configuration also has an effect on the operation rate
of the product.
• Full set of diamond tools: This configuration is
applicable for a flat floor finish.
• Half set of diamond tools: This configuration is
applicable when a flat floor finish is not necessary.
To replace the diamond tools
WARNING:
power plug before you replace the diamond
tools, to prevent accidental start.
WARNING:
diamond tools can become very hot.
WARNING:
protection when you replace the diamond
Always disconnect the
Use protective gloves, as
Use approved respiratory
2023 - 003 - 04.04.2023