Idiomas disponibles
Idiomas disponibles
3.3.1 Configuring the ventilation mode
• In the "EASY INST" menu, browse with the
confirm.
• Using the
or
- 0 = intermittent ventilation. Once all setpoints have been achieved, the fan stops, and comes back on for 150
seconds ("P17") every 10 minutes ("P18") to check if air is out of any setpoint.
- 1 = permanent ventilation (default setting). The ventilation is always on.
• Press
to confirm.
OK
• Press
to go back to the previous screen.
Press
a number of times to return to the home screen.
Information: the importance of the ventilation mode
• Ventilation helps to ensure that air circulates correctly, meaning that the temperature and humidity levels
are more even throughout the room.
• Bathing comfort can be significantly and economically improved by improving ventilation.
3.3.2 Configuring the heating mode
When installing a heating kit ("electric heater" or "hot water coil"), the appropriate heating mode setting must be used.
• In the "EASY INST" menu, browse with the
validate.
• Using the
or
- "Disable" = No heating option.
- "Electric" = Electric heater kit (default setting).
- "Water coil" = Hot water coil kit.
• Press
to confirm.
SET
• Press
to go back to the previous screen.
Press
a number of times to return to the home screen.
At this stage of the configuration, the heating mode is enabled, but the function has yet to be activated from the home
screen by the user:
To activate the heating kit:
• Press and hold (longer than 3 seconds) the
To deactivate the heating kit:
• Press and hold (longer than 3 seconds) the
The symbol
When the heating mode is active, the symbol
kit installed.
22
or
keys, choose the desired ventilation mode:
or
keys, choose between "Disable", "Electric" or "Water coil".
key, the screen shows "HEATING MODE ON".
key, the screen shows "HEATING MODE OFF"
indicates that the heating mode is activated but not active (inside air temperature setpoint).
keys until you reach the "P16" setting, then press
keys until you reach the "P44" setting, then press
or
is shown in the screen, depending on the heating
OK
to
OK
to
