clage DSX Touch Instrucciones De Uso página 37

CLAGE
2. How to use
Property / Setting
Here you get an overview of the unit properties as well as access to the factory reset.
Information about the unit
EN
Serial number; unit type; item number, maximum power consumption (MPS), operat-
ing times.
Software versions
Information on the software versions of the unit components.
Update software of the display: The software of the display can be updated manually
here. To do this, the unit must first be connected to the Internet via WLAN.
Legal, service, documentation: Here you will find the imprint, software licences and
QR codes with links to customer service, product registration and online instructions.
Restart & Reset
The display can be restarted or reset to factory settings. With a factory reset, all cus-
tomer entries are lost.
Error code
Display of a current error. Tap the service avatar for further help.
Error memory
List of the last ten errors that occurred.
Support for load shedding relay
When connecting additional three-phase units, a load shedding relay for electronic
instantaneous water heaters (CLAGE art. no. 82250) can be connected to the outer
conductor L2. The relay secures the operation of the instantaneous water heater and
switches other consumers on again only after the end of the heating operation.
This function ensures that current is always drawn via L2 even when the heating output
is low.
First select the operating mode "Lo" and check the function of the load shedding relay
at low unit output (35 degree setpoint and low water quantity). If the load shedding
relay flickers, the "Hi" operating mode must be selected.
Display / Operation
The user-adjustable parameters for menu navigation and display indication can be
found here.
Sound
Activate / deactivate operating tones.
Language
Selection of the menu language.
Display light & colour
Setting the display behaviour during operation and in idle mode.
Brightness of the display: You can reduce the brightness of the display during opera-
tion, e.g. to save power.
Brightness in idle mode: You can separately set how bright the display should shine in
idle mode. (0% = OFF)
Time until idle state: Set how long the display should remain lit after the last input.
Activate on water consumption: If this function is active, the display switches from idle
mode to the set operating brightness as soon as hot water is drawn.
Background colour opacity: The colour intensity of the background in the operating
display can be configured here.
37