Makita EN402MP Manual De Instrucciones página 12

Lubricating moving parts
NOTICE:
Follow the instruction of the frequency
and amount of grease supplied. Otherwise insuffi-
cient lubrication may damage moving parts.
Drive axle:
Apply grease (Makita grease N No.2 or equivalent)
every 30 hours of operation.
Fig.31
NOTE: Genuine Makita grease may be purchased
from your local Makita dealer.
Grease lubrication
Interval of lubrication: Every 25 operating hours
1. Remove the bolt from the hole for lubrication.
1
Fig.32
► 1 . Bolt
2. Remove the cap from the grease vessel. Align the
outlet of the grease vessel with the hole on the cover,
and then turn the grease vessel to attach the outlet of
the grease vessel into the hole.
1
Fig.33
► 1 . Grease vessel 2. Hole
3. Apply the grease to the tool (Approximately 3 g
(0.1 oz) as a guide).
4. Remove the grease vessel.
5. Tighten the bolt.
Grinding the shear blades
NOTICE:
If the shear blades have considerably
deformed by grinding, replace the shear blades
with new ones.
1. Install the battery cartridge to the tool.
2. Turn on and start the tool so that the upper blade
and lower blade are positioned alternately.
Fig.34
3.
Turn off the tool and remove the battery cartridge
from the tool.
12 ENGLISH
2