Hilti PM 2-PG Manual De Instrucciones Original página 22

3.4 Information displayed during operation
Operating status and charge
status indicator
Laser beam
3.5 Items supplied
Point laser, pouch, 4 AA batteries (not in all markets), operating instructions, manufacturer's certificate
4 Technical data
Range of the points
Self-leveling time
Self-leveling range (typical)
Accuracy at 10 m (33 ft)
Beam diameter
Laser class
Beam divergence, laser points
Average output power (max) (p)
Wavelength (λ), ±10 nm
Pulse duration (tp)
Pulse frequency (f)
Power source
Battery life (typical)
Automatic power-off after
Operating status indicator
Operating temperature
Storage temperature
Protection against dust and water spray
Tripod thread (product)
Stand thread (foot)
16 English
Status
LED does not light up
LED shows continuously
LED quick-flashes
Laser beam flashes twice every
10 seconds
Laser beam flashes five times
and then remains permanently
on.
Laser beam flashes at high fre-
quency.
Distance 5 m (16.4 ft)
Distance 20 m (65.6 ft)
Meaning
• Product is switched off
• Batteries are exhausted
• Batteries are inserted incor-
rectly
• Laser beam is switched on
Product is in operation
• Batteries are almost exhausted
• Batteries are almost exhausted
• Automatic power-off has been
deactivated
• Product unable to level.
30 m
(98 ft - 10 in)
3 s
±4°
±3 mm
(±0.1 in)
< 4 mm
(< 0.2 in)
< 15 mm
(< 0.6 in)
Class 2, visible, 510 - 530 nm, ±10 nm
(IEC 60825-1:2014); class II (CFR 21
§1040.10 and 1040.11) (FDA)
0.7 mrad
< 1 mW
510 nm ... 530 nm
< 60 µs
< 12 kHz
4x 1.5V AA battery
at 24 °C (72 °F) : 70 h
1 h
LED and laser beams
−10 ℃ ... 40 ℃
(14 ℉ ... 104 ℉)
−25 ℃ ... 63 ℃
(−13 ℉ ... 145 ℉)
IP 54 as per IEC 60529
UNC ¹/₄"
BSW ⁵⁄₈" UNC ¹⁄₄"
2341493
*2341493*