Replacing
the light bulb
@ Set screw
(_) Face plate
Turn off the power switch and unplug the machine,
Loosen the face plate set screw C), and remove the face
plate (_),
For your safety:
, The machine is designed to use a 15 W Light Bulb,
Maximum,, DO NOT use light bulb that exceeds 15 W,
o The light bulb wilt be HOT, Wait until it cools down,
TO remove:
Push and twist to the left,
To insert:
Push and twist to the right.
Attach the face plate, and tighten the face plate set
screw_
L_ To remove
(_ To attach
(_ Light bulb
f
Cleaning
the feed dogs
(_ Needle plate setscrew
(_ Needle plate
Turn off the power switch and unplug the machine.
Open the looper and side covers.
Remove the needles and presser foot.
Remove the needle plate setscrew and needle plate
(_) Feed dogs
Brush the lint from the feed dogs to the front with the lint
brush,.
Replace needle plate, presser foot and needles..
Close the looper and side covers.
f
f
\
®
J
92
J
Capítulos
