Replacing The Light Bulb; Cleaning The Bobbin Holder - Sears Kenmore 385.16221300 Manual De Instrucciones

Tabla de contenido
SECTION Viii. CARE OF YOUR MACHINE
NOTE:
* Unplug the machine_
* Do not dismantle the machine other than as explained
in this section.
* Do not store the machine in a high-humidity area, near
a heat radiator, or in direct sunlight°
* Clean the outside of the machine with a soft cloth and
mild soap
Replacing
the Light
Bulb
CAUTION:
As the light bulb could be HOT, protect your fingers when
you handle it.
Unplug the machine and open the face cover, Pull out the
bulb from the sockeL Insert the new bulb into the opening of
the socket, Close the face cover.
Cleaning
the
Bobbin
Holder
[] To insure that the machine operates at its best, you need
to keep the bobbin area clean at all times
Turn off the power switch and unplug the machine.
Remove the hook cover plate by sliding the hook cover
plate release button to the right
[_Take
out the bobbin Brush out dust and lint with a lint
brush or a vacuum cleaner.
[] Insert the bobbin and attach the hook cover plate.
f
[]
[]
[]
!
I
1
I
J
/
J
92
Tabla de contenido
loading

Tabla de contenido