Idiomas disponibles
Idiomas disponibles
OPERATION
2. Move the fuel shutoff valve to the ON position (see
Figure 14).
Figure 14 – Fuel Shutoff Valve in the ON Position
3. Move the choke lever to the ON position (see
Figure 15).
Figure 15 – Choke Lever
22
4. Push the engine control switch into the RUN
position (see Figure 16).
Figure 16 – Engine Control Switch
5. Firmly grasp and pull the recoil handle slowly until
you feel increased resistance. At this point, apply a
rapid pull while pulling up and slightly away from the
generator (see Figure 17).
Figure 17
6. As the engine starts and stabilizes, gradually move
the choke lever back to the OFF position.
