Tabla de contenido
Cloudy picture, stripes, streaks, or similar
Cloudy picture, stripes, steaks, or similar
(with T-CAM connected)
connected
work
Complete failure of device.
Possible lighting up of status display
Color distortions
Distal object lens misted or lens soiled
Camera objective lens misted or lens
soiled
flexoscope misted or lens soiled
Contacts of the T-CAM are soiled
Not connected to AC power
External light source defective or
insufficient light output
cable being used are damaged
Power supply failure
plug and socket on device
Defective camera electronics
not fully inserted
White balance not carried out correctly
defective
Camera connecting cable of video unit
is broken.
No memory card inserted.
Memory card full
distal lens with cotton tip applicator
moistened with isopropyl alcohol
(100%).
for repair.
Clean contacts
Withdraw T-CAM and clean camera
objective lens with cotton tip
applicator moistened with isopropyl
alcohol (100%).
from camera system and clean ocular
applicator moistened with isopropyl
alcohol (100%).
Clean contacts
for repair.
Connect to AC power.
inspection or repair.
corresponding device.
inspection or repair.
Check the power supply.
into socket on device.
Perform reset
repair.
Perform reset
Carry out new white balance.
monitor (see instruction manual for
monitor).
Have a new camera connecting cable
fitted.
Insert the memory card into the
switched off, then turn the monitor on
again.
Change memory card.
Tabla de contenido
