Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
99639201_a_ml.qxp
02/03/2006
W
hat do you do in case of operating
If you have a doubt about the functioning of your oven, this does not
necessarily mean that there is a malfunction. In any event, check the following
items:
Y
ou observe that...
The oven is not heating.
The temperature indicator is
flashing.
The oven light is not working.
The pyrolysis cleaning cycle
does not begin.
20
16:20
Page 20
malfunctions?
P
ossible causes
• The oven is not connected.
• The fuse in your electrical set-up
is not working.
• The selected temperature is too
low.
• The sensor is defective.
• The thermostat is faulty.
• The oven has experienced
overheating and has engaged
safety steps.
• Door locking defect.
• Defective temperature sensor.
• The light is out of order.
• The oven is not connected or the
fuse is not working.
• The door is not properly closed.
• The locking system is defective.
• The
temperature
sensor
is
defective.
• The contact for "closed door"
detection is defective.
W
hat should you do?
- Connect the oven.
- Replace the fuse in your electrical
set-up and check its capacity (16A).
- Increase the selected
temperature.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Replace the light.
- Connect the oven or replace the
fuse.
- Verify that the door is locked.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
- Call the After-Sales Service
Department.
