Idiomas disponibles
Idiomas disponibles
Safety and operating instructions
General information
Design and function
This die grinder is intended for mounted wheels and rotary burrs only. This model is lubricated. The ma-
chine, its attachments and accessories must only be used for the purpose for which they were designated,
all other use is prohibited.
■
Never use grinding wheels attached with an adapter as this machine is not fitted with a wheel guard
■
Never attach circular saw blades or other cutters than the abrasive wheels or brushes specified for
the tool
Signs and stickers
The product is fitted with signs and stickers containing important information about personal safety and
product maintenance. The signs and stickers shall always be easy to read. New signs and stickers can be
ordered by using the spare parts list.
EC DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, S-105 23 STOCKHOLM, SWEDEN declare that the product
(with name, type and serial number, see front page) is in conformity with the following Directive(s):
2006/42/EC
Harmonised standards applied:
ISO 11148-9
Technical file available from:
Quality Manager, Atlas Copco Industrial Technique, Stockholm, Sweden
Stockholm, 1 July 2013
Tobias Hahn, Managing Director
Signature of issuer
Installation
Installation of vibrating tools
It is recommended that a minimum length of 300 mm of flexible hose for compressed air is inserted be-
tween a vibrating tool and the quick-action coupling.
Air quality
■
For optimum performance and maximum product life we recommend the use of compressed air with
a dew point between +2°C and +10°C. Installation of an Atlas Copco refrigeration-type air dryer is
recommended.
■
Use a separate air filter of type Atlas Copco FIL, removes solid particles larger than 15 microns and
more than 90 % of liquid water, installed as close as possible to the product and prior to any other air
preparation unit like REG or DIM (please see Air Line Accessories in our main catalogue). Blow out
the hose before connecting.
Lubricated models:
■
The compressed air must contain a small quantity of oil. We strongly recommend that you install an
Atlas Copco oil-fog lubricator DIM, to be set normally at 3–4 drops (50 mm
ning tools, or an Atlas Copco single-point lubricator type Dosol for short cycle running tools.
For Dosol setting please see Air Line Accessories in our main catalogue.
6
EN
© Atlas Copco Industrial Technique AB - 9836 9632 56
LSF38 S180 E/R
3
)/min for long cycle run-
