Atlas Copco LSF38 S180 E Instrucciones Del Producto página 4

Safety and operating instructions
■
are aware of all the relevant national safety instructions and accident prevention instructions
■
have read and understood the operating instructions
Operation
Operation of the product may only be undertaken by qualified operators. Operators are qualified if
they:
■
are physically able to handle the bulk, weight and power of the tool
■
are trained to operate the product in conformity with national directives
■
are aware of all the relevant national safety instructions and accident prevention instructions
■
have read and understood operating instructions
Personal protective equipment
WARNING Entanglement hazard
Do not wear jewellery and loose clothing
►
Keep neckwear away from tool and accessories to avoid choking
►
Keep hair away from tool and accessories to avoid scalping
►
The personal protective equipment must conform to the applicable health and safety regulations.
Always wear the following personal protection:
■
Safety helmet
■
Hearing protection
■
Safety goggles with side protection
■
Protective gloves
■
Safety footwear
Drugs, alcohol and medication
Drugs, alcohol and medication may impair your judgement and powers of concentration.
WARNING Poor reactions and incorrect assessments can lead to serious accidents or death
Never operate the product when you are under the influence of drugs, alcohol or medication
►
Prevent other people from using the product if they are under the influence of drugs, alcohol or
►
medication
Installation, Operation and Maintenance: precautions
WARNING Explosives and explosive gases, explosion hazard
If the product comes into contact with explosives, an explosion could occur. Explosions can lead to
serious injuries or death.
Sparks can fly when operating the product, these can detonate highly flammable dusts and gases and
lead to fire or explosions.
Never operate the product near explosives
►
Never work in a highly flammable or explosive environment
►
Make sure there are no hidden gas sources in your working area
►
WARNING Electric shock
Should the product come in contact with electric circuits or other electrical power sources, there is a
risk of serious injury or death.
Never work near electric circuits or other electrical power sources
►
Make sure there are no hidden electric circuits in your working area
►
4
EN
© Atlas Copco Industrial Technique AB - 9836 9632 56
LSF38 S180 E/R