Mitsubishi Electric CITY MULTI PURY-P-YNW-A Manual De Instalación página 51

Idiomas disponibles

・Do not remove the ground wire that connects Main Box and Inverter Box.

・Install the transmission cable as shown in the figure above so that the cable is long enough for the Main Box to be

moved for servicing.

・If there are any gaps around the power cable and transmission cable, please be sure to fill these in with a suitable

material to prevent snow from entering, which may cause damage to the electrical parts, and to protect your hands

from direct contact with cables.

・When putting the power cable through the knockout hole without using a conduit tube, deburr the hole and protect

the power cable with protective tape.

・Use a conduit tube to narrow down the opening if there is a possibility of small animals entering the unit.

・When taking the conduit tube out from the bottom part of the unit, caulk around the tube opening to prevent water

infiltration.