Idiomas disponibles
Idiomas disponibles
Problem
The oven will
not self-clean.
A crackling or
popping sound.
Excessive
smoking during
a self-cleaning
cycle.
The oven door
will not open
after a self-
cleaning cycle.
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 99
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 99
Cause
The oven door lock is turned on.
The Smart Divider is installed in
the oven.
The oven is too hot.
The self-cleaning oven controls
are not properly set.
A surface burner is on.
This is normal.
This is the first time the oven
has been cleaned.
This is normal.
Action
The display will show the
Lock icon. Hold the oven door
open, and then tap Settings for
3 seconds. The oven will beep
and the Lock icon will turn off.
Self-clean will not operate with
the Smart Divider installed.
Remove it from the oven.
Let the oven cool down, and
then reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The door
must lock before the self-clean
cycle can start.
Reset the self-cleaning oven
controls. (See page 60.)
Turn off the surface burner.
Self-clean will not operate if a
surface burner is on.
This is the sound of the metal
heating and cooling during any
cooking or cleaning function.
This is normal. The oven will
always smoke more the first
time it is cleaned.
Wipe up all excessive soil before
starting the self-cleaning cycle.
If smoke persists, turn the
burner knob to Off. Open the
windows to clear the smoke
from the room. After the oven
has cooled and unlocked, wipe
up excessive soil, and then reset
the oven for self-cleaning.
The oven door will stay locked
until the oven temperature
drops below 400 °F.
English 99
2023-01-12 오후 2:41:25
2023-01-12 오후 2:41:25
