Hitachi PC-ARFP1E Manual De Instalación Y Funcionamiento página 49

MENU OPERATION
?
N O T E
• If "Once" of the timer operation setting is selected, the setting content
will be automatically changed to "Not Used" after "Once" timer
operation.
• Do not set the same hour for both ON/OFF timers.
4 Press "OK" to finish the simple timer setting. The
confirmation screen will be displayed.
5 Select "Yes" by pressing " " or " " and press "OK". The
setting will be confirmed and the screen will return to the
normal mode.
OK
/
?
OK
/
?
" " will be indicated when the
timer operation is activated.
8.3 RESET FILTER TIME SIGNAL
This function is used to turn off the filter signal indication and to
reset the time of use for the filter.
?
N O T E
The filter cleaning period can be set by means of the optional function b4
1 Select "Reset Filter Time Sign." from the menu and press
"OK". The "Reset Filter Time Sign." screen will be displayed.
OK
/
?
Menu
OK
/
?
2 Select "Yes" by pressing " " or " " and press "OK". The
indication of "FLTR" will be turned OFF and the screen will
return to the normal mode.
OK
/
?
Reset Filter time sign.
OK
/
?
The "Filter Usage Time" may not display depending on the
type of the indoor unit.
41 PMML0496 rev.1 - 12/2020
A/C Meeting Room
MODE SPEED TEMP
COOL
SPEED ADJ
15:10(Fri)
Simple Timer
Reset Filter time sign.
Operation Schedule
Elevating Grille
Power Saving Setting
SEL. OK ENT. RTN.
Filter Usage Time: 120h
Reset filter sign time?
Yes No
SEL. OK ENT. RTN.
?
N O T E
In the case of the following condition, the simple timer operation is NOT
available:
• When the prohibiting operation by remote control switch is set from
the central controller.
• When " " is indicated on LCD, the timer operation cannot perform.
Set the date and time according to "8.15 Adjusting date/time" section.
3 Press "OK" to return to the normal mode.
OK
01
/
03
Reset Filter time sign.
Filter Usage Time :
Completed.
/
?
OK
OK
ENT.
0h