Idiomas disponibles
Idiomas disponibles
1.
To recharge the battery (without power station) connect it to the MPPT auxiliary
charger.
2. Connect MPPT auxiliary charger input port to solar panel or car cigarette lighter
(accepts two charging input methods). If both charging sources are connected at
the same time, the system will give priority to the solar panel input.
3. The power level indicator corresponds to the LED that flashes during charging.
When charging is complete, all 4 indicators will be on.
4. While the battery is charging, the battery power level LED indicator will always be
on. Please long press the battery power button to turn off when storing the
battery.
WARNING:
•
For safety reasons, standard connectors must be used to charge the battery.
•
Charging with non-standard connectors may cause damage to the product and
may cause fire, electric shock or personal injury under extreme circumstances.
•
Please keep in mind and follow the operation in the manual. If you do not follow
the correct operation, we will not bear any warranty or other related
responsibilities.
4.2 Battery installation
Because the portable power station adopts the design of separating the battery from the
power station, you need to install the battery into the power station before you start using
GZE-2020R. If the battery is already installed in the power station, please ignore this step.
1. Release the front lock of the power station and open the battery compartment
cover.
2. Lift the battery with both hands and install it in the battery compartment while
keeping the vertical direction. Slowly lower the battery.
3. Close the battery compartment cover and buckle the lock to complete the battery
installation. The portable power station will turn on automatically after inserting the
battery.
18
