Turbo Function - SOLAC BA5610 Instrucciones De Uso

ELECTRONIC SPEED CONTROL:
The speed of the appliance can be regulated
by using the speed regulator control (A). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.

TURBO FUNCTION:

The appliance has a Turbo function (B2). By
activating the Turbo function all the power of
the motor becomes available, thus obtaining a
finer finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Stop the appliance by releasing the pressure
on the on/off button.
Unplug the appliance from the mains.
Clean the appliance.
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.1):
This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food ...
Attach the stick to motor body and turn in the
direction of the arrow (Fig.1.1).
Put the food to be prepared in the jar and
switch the appliance on.
For further cleaning, detach and remove the
stick by turning in the opposite direction of the
arrow.
CHOPPING ACCESSORY (FIG.2):
This accessory is used to chop vegetables or
meat...
To avoid damage to the appliance, remove
bones, nerves, cartilage, etc. from the meat.
Put blades set and and the food to be prepared
in the chopping container. (Fig.2.1 / 2.2).
Put the globet adapter fitting in the chopper
until it fits into place. (Fig.2.3).
Attach the unit to the cover pressing turn in the
direction of the arrow and switch the appliance
on (be careful: do not switch the appliance
on if the whole unit is not properly fitted and
connected together). (Fig.2.4).
Stop the appliance when the food reaches the
desired texture.
Detach the unit from the cover and release the
the adapter fitting.
NOTE 1: not to exceed half of the chopper cup
when working with solid foods.
NOTE 2: In the case of working with liquid
foods, do not exceed 300 ml.
WHISK ACCESSORY (FIG.3):
This accessory is used to whip cream, beat
egg whites...
Insert the whisk into the adapter fitting
(Fig.3.1). Attach the unit to the motor body and
turn in the direction of the arrow (Fig.3.2).
Put the food into a large receptacle and switch
the appliance on. For best results, turn the
whisk clockwise.
Remove the whisk accessory and release the
adapter fitting.
Note 1: Do not work at high speeds with this
accessory attached, as this would cause
defects in the whisk (spinning its wires).
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
During the cleaning process, take special care
with the blades, as they are very sharp.
It is advisable to clean the appliance regularly
and remove any food remains.
If the appliance is not in good condition of