Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Bluetooth Operation
EN
1. Connect the included power adapter to the turntable and long press the START
DE
button. The indicator light will turn red.
2. Rotate the function knob to Bluetooth mode. The indicator light will turn blue and
FR
flash quickly. You will hear an activation sound from the turntable.
ES
3. Turn on the Bluetooth feature of your media device and search for and select
"1byone BS020" to pair the media device and turntable.
IT
4. Once your media device is successfully paired with the turntable, the turntable will
play a short confirmation sound. The blue indicator light will flash slowly.
5. Play and stream music from your media device to the turntable. The indicator light
will become solid.
Note: Bluetooth version: 5.0
AUX-IN Operation
This turntable includes an auxiliary audio signal input jack for connecting
external audio devices like MP3 players, CD players, and older, non-
dockable iPods so you can listen to your external source through the
turntable's speakers.
1. Use an audio cable (not included) with one 3.5 mm stereo connection on each end
of the cable.
2. Plug one end into the AUX-IN jack on the turntable and the other end to the Line
Out jack of the audio device.
3. Power on the turntable and audio device. The indicator light of turntable will be red.
4. The volume level can be controlled through the turntable. Operate all the functions
on the auxiliary device as usual.
5. Please note that AUX-IN function is a first-priority function. Even if the indicator light
for PHONO/BT is on, these functions won't work while the AUX-IN function is in use.
Please unplug the AUX-IN cable before using the PHONO/BT functions.
NOTE:
1. Make sure the tone arm is securely locked to avoid any damage.
2. When you are done, don't forget to turn off the power on the turntable and your
external device.
12
Care
Turntable Body
• When the turntable body is dirty or dusty, first disconnect the AC adapter and then
wipe off the dirt and dust with a soft, dry cloth.
• Do not use benzenes, thinners, etc.
• When storing the product for a long time, disconnect the AC adapter from the
outlet and wrap the product in plastic. Do not allow the product or packaging to
become damp. The drive belt should be removed to prevent unequal stretching.
Stylus Tip
• If dirt and grime are stuck to the stylus tip, clean it
with a commercially sold brush.
• We recommend using a stylus cleaner (not
included) if the stylus tip is considerably dirty.
Clean the stylus tip by moving the brush from the
rear to the front of the stylus tip.
Replacing the Stylus
It's suggested to replace the stylus after 400 hours of use.
Removing the Stylus
• In addition to the deterioration of sound quality, records may also be damaged as
the cartridge's stylus tip wears down.
• Be sure to disconnect the product's AC adapter from the outlet.
• When replacing the stylus, hold the headshell and the cartridge body tightly.
Rotate the front of the stylus in a forward and down motion.
Installing a New Replacement Stylus
1. Mount the new replacement stylus to the cartridge.
Engage in body first
13
EN
DE
FR
ES
IT
Tabla de contenido
