1byone Audio-Technica AT3600 Manual Del Usuario página 6

Connection to External Speaker with RCA Audio Cable
EN
This turntable includes 4 built-in speakers and a built-in phone equalizer.
DE
If you wish to use your own amplifier or speakers, please follow the instructions
below:
FR
ES
IT
NOTE: In order to achieve the best sound, it is advised to set the turntable
volume to a minimal level. Then the turntable's audio will be played back through
your own amplifier, speakers, etc.
1. Setting pre-amplifier selector switch
This product has a built-in phono equalizer function. You can use the product
even if you do not have a phono amplifier or connectable equipment with a
built-in phono amplifier.
Use the pre-amplifier selector switch to set the output, as shown below.
Connected equipment
being used
Device with phono input PHONO
Device without phono
input
NOTE: The RCA Jacks are not designed to be connected directly to the
passive/unpowered speakers on LINE mode. If connected to the passive
speakers, there will be no sound.
RCA wired connection
Active Speakers
or
Amplifier
Position of pre-amplifier Where to connect RCA
selector switch audio cable
Phono input jack and
ground (earth) terminal
of connected equipment
LINE AUX or line input jack of
connected equipment
8
2. Connecting the device
Align the settings for the pre-amplifier selector switch and connect the
RCA audio cable to an input jack that is compatible with the connectable
equipment you are using (amplifier, active speakers, etc.).
• The RCA audio cable's red jack is for the right (R) channel, and the white jack is
for the left (L) channel.
With PHONO
PHONE
DC12V
To outlet
To outlet
With PHONO
PHONO
L R
Without PHONO
LINE OUT
R L
AUX IN AUX OUT
Connectable equipment
(Amplifier, etc.)
Without PHONO
AUX
L R
9
EN
DE
FR
ES
IT