Unpacking And Set Up; Aux In Operation; Powering On The Unit - 1byone 471us-0001 Manual De Instrucciones

UNPACKING AND SET UP

1.Carefully remove the unit from the display carton and remove all packing
EN
material from the unit
DE
2.Unwind the AC adapter jack and extend it to its full length.
3.Place the unit on a stable, level surface,convenient to an AC outlet and outside
FR
of any strong magnetic field.
ES
4.Connect the plug to your AC outlet.
5.Remove the opaque white plastic stylus cover from the phonograph stylus by
JP
sliding it in the direction of the arrow.
6.During this operation pay attention to the stylus, because the stylus damage is
IT
not covered by guarantee.
7.Remove the twist-tie that was used to secure the tone arm during the shipment.
8.Release the tone arm lock level.

POWERING ON THE UNIT

1.Connect the AC Adapter to the AC POWER Socket on the back of the unit.
2.Press the STANDBY/ON button until the indication LED lights up blue. This will turn
the system on.
3.When you have finished using the system, press STANDBY/ON button again, turn off
the unit with voice message: POWER OFF.
NOTE
When select a certain function, but without further instruction or signal to the unit
during 8 minutes, the unit will automatically turn off.
All manuals and user guides at all-guides.com
03

AUX IN OPERATION

1.This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and older, non-dock-able i pods, so you can listen
to your external source through the speakers of this system.
2.Use an audio cable( not included) with one 3.5 mm stereo connection on each
end of the cable.
3.Plug one end into the AUX-IN jack on the main unit and the other end to the
line-out jack of audio device.
4.Power On both devices.
5.The volume level can be controlled through the main unit. Operate all the functions
on the auxiliary device as usual.
6.Please note that AUX IN function is the first priority function. Even the indication
light of USB-MP3/ PHONO/ BT is on, these functions don't work while AUX-IN function
is using. Please unplug the AUX-IN cable before using USB-MP3/ PHONO/ BT function.
7.Remove the twist-tie that was used to secure the tone arm during the shipment.
8.Release the tone arm lock level.
NOTE
1.If the Line Out jack of your external device is connected, then you only need to
adjust the volume control of this system.
2.Make sure tone arm is securely locked to the tone arm lock to avoid any damage.
3.Press STANDBY/ON button to turn off the unit when you are done. Don't forget to
turn off the power on your external device as well.
04
EN
DE
FR
ES
JP
IT