Turntable Operation; Bluetooth Operation - 1byone 471UK-0010 Manual De Instrucciones

2. Turntable Operation

EN
Sufficiently lower the volume of the amplifier, speakers, etc.
DE
2.1 Connect the included power adapter to the turntable and slide the Power Switch to
the "ON" position.
FR
2.2 Remove the stylus protector from the stylus.
ES
2.3 Press the MODE button to choose turntable mode. The Red indicator light
indicates Turntable mode and blue indicator light indicates Bluetooth mode.
IT
2.4 Place the record on the slip mat. If using 45RPM records, put the
45RPM adapter on the center spindle before placing the record on
the platter.
2.5 Press the 33 or 45 RPM speed button according to the type of
record.
2.6 Press the Play/Stop button. The platter will start spinning.
2.7 Unlock the tonearm clip and set the tonearm lift lever to the up position.
2.8 Position the tonearm over the desired location (groove) on the record.
2.9 Carefully lower the tonearm on the record.
2.10 Turn up the volume of the turntable as needed.
2.11 When you are finished playing the record, raise the tonearm, return it to rest on
the arm clip and press the Play/Stop button to stop.
NOTE:
1. If the silent pause time between each track is longer than 3 minutes, the platter
will stop spinning automatically to avoid damaging the record. This stoppage does
not mean the turntable is defective.
2. If the felt mat gets dirty, it can easily scratch the record, so remove the felt mat
periodically and wipe off any dust.
3. To prevent the record from scratches and warping, remove it after use.
4. Do not use a disk stabilizer.
45RPM Adapter
12

Bluetooth Operation

1. Connect the included power adapter to the turntable and slide the Power Switch to
the "ON" position.
2. Press the MODE button to choose Bluetooth mode. The Red indicator light indicates
Turntable mode and blue indicator light indicates Bluetooth mode. You will hear an
activation sound from the turntable.
3. Turn on the Bluetooth feature of your media device and search for and select
"1byone BS017" to pair the media device and turntable.
4. Once your media device is successfully paired with the turntable, the turntable will
play a short confirmation sound.
5. Play and stream music from your media device to the turntable.
Note: Bluetooth version: 4.2
Recording the Vinyl to Your Computer
Please follow the below steps to set up Audacity to record from the USB audio device.
For more details, please refer to the BRIEF INTRODUCTION OF AUDACITY at https://
manual.audacityteam.org/man/recording_with_usb_turntables.html
1. Download the Audacity software and complete installation
1.1 Ensure your Audacity software is up to date. You can download the current
version from http://www.audacityteam.org/download/
1.2 Follow the instructions to complete installation.
2. Set up Audacity to record from the USB audio device.
2.1 Connect the USB device
Use the supplied USB cable to connect your turntable and your computer. No
extra driver is required.
13
EN
DE
FR
ES
IT