Included Items - 1byone Audio-Technica AT3600 Manual Del Usuario

Included Items

EN
Before installing the turntable, check the package contents to ensure all parts below
DE
are included and free of visible damage. Please retain the original packaging materials
for exchange or return purposes.
FR
1) Turntable Unit
ES
2) Power Adapter
IT
3) Turntable Lid
4) Slip Mat
5) Platter with Belt
6) Counterweight
Installing the turntable
• Mount the turntable on a level surface.
• To avoid the effects of vibrations and acoustic pressure, do not mount the turntable
next to items such as speakers.
• The turntable may pick up radio static if placed next to a radio. Therefore, try to keep
the turntable away from transmission devices such as radios.
• If the turntable is near equipment (cell phone, etc.) that emits strong radio waves,
noise may occur.
Installing the Lid
Insert the hinge pockets of the lid onto
the hinges of the turntable.
7) Cartridge Alignment Protractor
8) 45 RPM Adapter
9) Instruction Manual
4
Turntable Platter and Belt Setup 1. Turn the platter over and check the belt position.
Make sure that the drive belt is looped in the middle of the circle. The drive belt
located too high or too low in this circle may cause the drive belt to fall off or speed
to be unstable.
2. Set the platter on the spindle.
Make sure the platter is fully seated on the spindle.
Opening
Spindle
3. Place the belt on the motor pulley.
Align one of the platter openings with the motor pulley, and while pulling both
ends of the red ribbon that comes attached to the belt, place the belt on the motor
pulley, as per the diagram. When doing this, be careful not to twist the belt.
Hook
Belt
Straight
4. Remove the red ribbon from the belt.
Platter
Motor Pulley
Motor Pulley
Twisted Wrong location
5
EN
DE
FR
ES
IT