1byone Audio-Technica AT3600 Manual Del Usuario página 11

Troubleshooting
EN
Problem Solution
DE
The platter does • Is the AC adapter connected to the outlet?
not spin.
-Connect the AC adapter to the outlet.
FR
• What's the status of the indicator light?
ES
- Power is on, but the indicator light is off. That means the
turntable is in ERP mode or not turned on. Press and hold the
IT
START button for 3 seconds to reboot the turntable.
- The indicator light is blue. That means the turntable is in
Bluetooth mode. Please turn the Function knob to switch to
Turntable mode.
- The red indicator light will indicate Turntable mode.
• Has the belt slipped from the platter?
-Correctly place the belt on the platter.
• Is the belt placed on the motor pulley?
-Check that the belt is placed on the motor pulley (brass-colored)
correctly.
• Has the belt been damaged?
-Replace it with a new belt.
• Is the AUX-IN cable pluged in?
-AUX-IN function is a first-priority function. Please unplug the
AUX-IN cable before using the PHONO/BT functions.
The platter spins, • Is the stylus damaged?
but there is no
-Check the stylus and replace it, if necessary. It's suggested to
sound from the
replace the stylus after 400 hours of use.
turntable?
• Is the stylus placed correctly on the body of the cartridge?
-Check the cartridge and adjust it, if necessary.
The stylus skips. • Is the record warped?
-Check the record.
• Is the record scratched?
-Check the record.
• Is the stylus pressure correct?
-Refer to "Cartridge Tracking Force Adjustment" to readjust the
tracking force.
18
The turntable is • Is the product picking up excessive vibrations from the floor,
making a strange surfaces of the walls, or nearby speakers?
'howling' sound.
-Decrease the vibrations or mount the product on a surface that
is not subject to the effects of vibrations.
• Is the product mounted on an unstable surface?
-Check whether the surface on which the product is mounted is
suitable.
There is noise • Is there dust on the cartridge's stylus tip?
when the record
-If dust is stuck to the stylus tip, clean it with a commercially sold
is playing.
brush.
The sound when • Are the speed settings for this product correct?
the record is
-Please select the correct speed for the type of record being
playing is either
played.
too fast or too
slow.
Playback speed • Is the belt stretched out?
slows down or
-Replace with a new belt.
there is irregular
• Is the belt installed correct?
rotation.
-Refer to "Turntable Platter and Belt Setup" to setup the belt.
19
EN
DE
FR
ES
IT