1byone Audio-Technica AT3600 Manual Del Usuario página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Rotating the Platter
EN
1. Using your hands, slowly rotate
DE
the platter ten times in a clockwise
direction (Figure 1).
FR
2. This step is for resetting the auto
ES
mechanism, getting rid of any twists in
the belt and making sure the belt rides
IT
smoothly along the drive rim on the
underside of the platter.
3. Place the slip mat on top of the platter.
Make sure the 1byone logo on the mat
is facing up (Figure 2).
Cartridge Tracking Force Adjustment
The supplied Counterweight is suitable
for cartridges weighing between 3.0-6.0g.
1. Gently push and turn the counterweight onto the
rear of the tonearm (with the dial facing toward the
front of the turntable).
2. Pull the protector straight forward to remove it.
NOTE: Applying a downward force may cause
the stylus to come off the body. Only low volume
is outputted if the stylus has come off, or is about
to come off, so refer to "Replacing the stylus" to
reattach the stylus correctly.
3. Remove the tie-wrap and unlock the tonearm.
4. Lower the tonearm lift lever and position the cartridge in the space between the
tonearm rest and platter.
Figure 1
Figure 2
Counterweight
Tracking Force Dial
Center Line
6
5. Carefully rotate the counterweight until the tonearm achieves a neutral balance.
The tonearm should return to this balanced position if it is moved up or down. This
adjustment must be done carefully.
Tonearm
Adjust so that tonearm is level and neutrally balanced
6. Once the tonearm is correctly balanced, return the tonearm to its rest. Without
moving the position of the counterweight, gently rotate the tracking force dial until
the zero is in line with black center line on the rear of the tonearm. Check to make
sure the tonearm is still neutrally balanced.
7. Finally, rotate the counterweight and tracking force dial together counterclockwise
(as seen from the front) to adjust the tracking force according to the cartridge
manufacturer's recommendations.
Note: Each mark on the scale represents 0.1g. The recommended tracking force for
the factory-installed cartridge is 3.5g±0.5g. Carefully rotate the tracking force dial.
When "3.5" is centered over the black line on the top of the tonearm, please stop.
Counterweight
7
EN
DE
FR
ES
IT
Tabla de contenido
loading

Tabla de contenido