Mitsubishi Electric Mr.Slim PSA-M KA Serie Manual De Instrucciones página 18

7. Energy Saving
Auto return
Auto return No /Yes
Cool: After 60 min
back to 28°C
Heat: After 60 min
back to 20°C
Select:
Cursor Content
F1 F2 F3 F4
Auto return
Auto return Yes
Cool: 60 min, 28°C
Heat: 60 min, 20°C
Changes saved
Main menu:
en
Navigating through the screens
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
Timer or preset temperature settings will not be effective when the tem-
perature range is restricted and when the system is centrally controlled
(when the temperature range setting from local controller is prohibited).
When the system is centrally controlled (when timer operation from local
remote controller is prohibited), only the timer setting will be ineffective.
7.2.2 Setting the energy-saving operation schedule
<Button operation>
Energy saving
Auto return Yes
Cool: 60 min, 28°C
Heat: 60 min, 20°C
Schedule No
Setting display:
Cursor
F1 F2 F3 F4
Energy saving
Mon Tue Wed Thu Fri Sat Sun
No.1
2
3
4
Setting display:
day
F1 F2 F3 F4
16
Change the settings with the [F3] or
[F4] button.
Auto return: No (disable)/Yes
(enable)
• Cool: Timer setting range is 30 to
120 minutes in 10-minute
increments.
Temperature setting range
is 19 to 30ºC (67 to 87ºF)
(1ºC increments).
• Heat: Timer setting range is 30 to
120 minutes in 10-minute
increments.
Temperature setting
range is 17 to 28ºC
(63 to 83ºF) (1ºC incre-
ments).
Press [SELECT] the button to save
the settings. "Cool" includes "Dry"
and "Auto Cool" modes, and "Heat"
includes "Auto Heat" mode.
The screen to set the selected item
will appear.
Bring up the "Energy saving"
screen. (Refer to page 15)
Move the cursor to "Schedule," and
press the [SELECT] button.
The screen to see the schedule will
appear.
%
%
% Press the [F1] or [F2] button to see
%
the settings for each day of the
week.
Press the [SELECT] button to go to
the setting screen.
Energy saving
Energy saving No /Yes
Select:
Cursor
F1 F2 F3 F4
Energy saving
Mon Tue Wed Thu Fri Sat Sun
%
No.1
2 %
%
3
4 %
Input:
day Select
F1 F2 F3 F4
Energy saving
Mon
No.1 13 00 14 00 80 %
%
2
14 00 15 00 70
%
3
%
4
Select:
Cursor Content
F1 F2 F3 F4
Energy saving
Mon
Changes saved
Day selection:
Fri
28.5
Room
Cool Set temp. Auto
Mode Temp. Fan
Navigating through the screens
• To go back to the setting change/day of the week selection screen
...........................................................[SELECT] button
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
The screen to enable (Yes)/disable
(No) the energy-saving operation
schedule will appear.
Select "No" or "Yes" with the [F3] or
[F4] button.
Press the [SELECT] button to go to
the setting change/day of the week
selection screen.
The setting change/day of the week
selection screen will appear.
Up to four operation patterns can
be set for each day.
Move the cursor to the desired day
of the week with the [F1] or [F2]
button, and press the [F3] button
to select it. (Multiple days can be
selected.)
Press the [SELECT] button to go to
the pattern setting screen.
The pattern setting screen will
appear.
Press the [F1] button to move
the cursor to the desired pattern
number.
Move the cursor to the desired item
with the [F2] button out of the start
time, stop time, and energy-saving
rate (arranged in this order from
the left).
Change the settings with the [F3] or
[F4] button.
• Start/Stop time:
settable in 5-minute increments
* Press and hold the button to
rapidly advance the numbers.
• Energy-saving rate:
The setting range is 0% and 50 to
90% in 10% increments.
Press the [SELECT] button to save
the settings.
A confirmation screen will appear.
The lower the value, the greater
the energy-saving effect.
will appear on the Main
display in the Full mode when
the unit is operated in the energy
saving mode.