Energy Saving - Mitsubishi Electric Mr.Slim PSA-M KA Serie Manual De Instrucciones

7. Energy Saving

7.1. Restriction
7.1.1 Setting the temperature range restriction
<Button operation>
Main Main menu
Energy saving
F1 F2 F3
Energy saving
Restriction
Energy saving
Energy data
Main menu:
Cursor
en
F1 F2 F3 F4
Restriction
Temp. range No
Cool• Dry 25°C - 28°C
Heat 20°C - 25°C
Auto 22°C - 28°C
Setting display:
Page
F1 F2 F3 F4
Temp. range
Temp. range No / Yes
Cool • Dry 25°C - 28°C
Heat 20°C - 25°C
Auto 22°C - 28°C
Select:
Cur. Cursor
F1 F2 F3 F4
14
Select "Energy saving" from
the Main menu, and press the
[SELECT] button.
F4
Move the cursor to "Restriction"
with the [F1] or [F2] button, and
press the [SELECT] button.
The current settings will appear.
Move the cursor to "Temp. range"
with the [F1] or [F2] button, and
press the [SELECT] button.
The screen to set the temperature
range will appear.
Move the cursor to the desired
item with the [F1] button out of
"Temp. range," "Cool•Dry," "Heat,"
or "Auto."
Temp. range
Temp. range No / Yes
Cool •Dry 25°C - 28°C
Heat 20°C - 25°C
Auto 22°C - 28°C
Select:
Cursor Temp.
F1 F2 F3 F4
Temperature setting ranges
Temp. range
Temp. range No / Yes
Cool •Dry 25°C - 28°C
Heat 20°C - 25°C
Auto 22°C - 28°C
Changes saved
Main menu:
* The settable range varies depending on the connected unit.
*1 Temperature ranges for the Cool, Dry, and Auto (dual set point) modes
can be set.
*2 Temperature ranges for the Heat and Auto (dual set point) modes can
be set.
*3 Temperature ranges for the Heat, Cool, and Dry modes must meet the
conditions below:
• Upper limit for cooling - upper limit for heating ≥ Minimum temperature
difference (varies with indoor unit model)
• Lower limit for cooling - lower limit for heating ≥ Minimum temperature
difference (varies with indoor unit model)
*4 Temperature range for the Auto (single set point) mode can be set.
Press the [SELECT] button to save the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu ........... [MENU] button
• To return to the previous screen ....... [RETURN] button
Fri
28.5
Room
Cool Set temp. Auto
Mode Temp. Fan
7.1.2 Operation locked function
<Button operation>
To enable the operation lock function, set the item "Operation locked" to
"Yes".
Restriction 2/2
Operation locked No
On/Off Mode Set temp.
Vane Menu Fan
Louver
Setting display:
Page
F1 F2 F3 F4
Change the settings with the [F3] or
[F4] button.
• Temp. range: No (unrestricted) or
Yes (restricted)
• Cool•Dry: Upper and lower limit
temperature (1ºC increments)
• Heat: Upper and lower limit tem-
perature (1ºC increments)
• Auto: Upper and lower limit tem-
perature (1ºC increments)
Mode Lower limit Upper limit
*1 19 ~ 30ºC 30 ~ 19ºC
Cool•Dry
*3 (67 ~ 87ºF) (87 ~ 67ºF)
*2 17 ~ 28ºC 28 ~ 17ºC
Heat
*3 (63 ~ 83ºF) (83 ~ 63ºF)
19 ~ 28ºC 28 ~ 19ºC
Auto *
4
(67 ~ 83ºF) (83 ~ 67ºF)
will appear on the Status
display and the Main display in the
Full mode when the temperature
range is restricted.
Bring up the Restriction setting
screen. (Refer to 7.1.1)
Move the cursor to "Operation
locked" and press the [SELECT]
button.